Quote:
|
Originally Posted by leathermang
One major tip...
FILL that stupid space between the engine and the IP with towels... the place directly below where you will be working...
|
Thats the best advice on here. especially when you drop the small 8mm nuts!
Its about a 20 minute job. Be sure you have a reamer on hand when you do it.
tools needed: 1/4" ratchet with long extension, swivel joint and 8mm socket.
3/8" ratchet, long extension, 12mm medium depth socket with
built in swivel (13mm socket needed also if your reamer is 13mm)
a 12mm doesn't hurt to have if you can't get to the plug behind the canister housing.
job is pretty simple with these tools, no muss no fuss!