Quote:
|
Originally Posted by Johnhef
any way you look at it, I'm probably going to end up drilling it out.
Had soaked it with PB for a day before I even tried to move it the first time. Also tried to heat the head up as well as tapping it with a hammer before using the stud extractor. It still broke  |
Do you have one of the hand impact drivers.....the one thats meant for screws....slot it with a dremel tool and use a straight bit on a hand impact tool and whap it with a hammer.
But then.....you may just have to do it the hard way...........which might be the only way.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
|