View Single Post
  #12  
Old 03-23-2005, 03:53 PM
csnow's Avatar
csnow csnow is offline
Registered User
 
Join Date: May 2002
Location: Mass
Posts: 1,127
On a 124, you can rule out/rule in the fuel pump relay by jumping pins 7&8 at the relay block. This simulates a relay on condition. Bet yours is the same.

You can then tell if a fuel pump is operating by putting a hand on it. You probably have 2 pumps.
__________________
1986 300E 5-Speed 240k mi.
Reply With Quote