I just did mine today....took a while, was dirty as heck, and not fun getting the back bolt in for the driver side mount, took forever. I didn't disconnect my linkage when I lifted the engine, I checked it and there was no strain on it or anything, it moved freely...

My head hurts too! I smacked it on the hydraulic lift holding up the engine when I carelessly shoved myself back under after grabbing a tool.....it hurts!

Oh! Even better....I had the big bolt that goes up inside the frame for the mount fall out suddenly from the darkness when I was about to grab it with a magnet wand I had....it landed right on my lower lip!! OW!! So needless to say I continued working with a very swollen, oil flavored....lower lip......

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)