Quote:
|
Originally Posted by CzarFC
Those tabs are the wrench points. I found an adjustable wrench was barely enough for a good grip with about 22mm, although a slightly larger wrench would have been better. If you're worried about slipping, use a large set of pliers with either rubber boots, or a shop rag to protect the cam. The grip should keep you from slipping. A wrench should be good enough.
|
Thanks, this is probably the way I'll do it. Although, incredibly, I don't have an adjustable wrench of this size (ha ha), I'm going to need one!
On the timing, that is the deal - if the lines are lined up (and didn't go around once, heh heh...well, not so funny
) it must be good. I just wasn't expecting the cam to spring forward.