Quote:
|
Originally Posted by Brian Carlton
He could use a drill with a 90 degree right angle head. But, this is risky. Positioning it square with the hole is not the easiest thing to do. Might be possible if the hole is reasonably straight to start.
However, whether the Helicoil insertion tool will make it in a six inch space is questionable.
|
IF the hole is reasonable straight, which it should be he might be able to get away with it but I would doubt it anyways.
I thought the helicore was already half an inch which is screwed into the tool and the tool is about 4-5 inches long. Hard to say but he will have to make the call