View Single Post
  #3  
Old 04-16-2005, 01:04 AM
theairboy theairboy is offline
Registered User
 
Join Date: Dec 2004
Location: Seattle WA
Posts: 82
Well for starters you have to figure out everything that fuse supplies power to. and it looks like you have found the majority if not all.

Then unplug all the items and put a fues in.

If you found them all it shouln't blow rite away.

Then plug one of the things in and operate it. If the fuse is ok then go to another item and plug it in and evaluate the fuse.

Do you see were I'm going with this? When the fuse blows start suspecting the item you last pluged in.

This works very well if the fues blow rite away. But is a bit harder if its blowing intermetintly.

For all lamps that are acessable just pull the bulb. That wont tell you if its the wires but its most likely a bulb/socket or wires at the door seem area. Unless you just had u-haul wire a trailer light set up for you but I doubt that.
Reply With Quote