I would like to thank everyone who gave me advice on repairing my Cruse Control Amplifier. I was a little scared at first plus getting my 6 foot 280 lbs under the dash board was not an easy. After removing the component, I removed the card from the casing and proceeded to resordier all of the connections. When you look at it you will not think that something may be loose. It look new to me but then again my car is in excellent shape. By the way no one told me about putting the screw back in … it was a nightmare. Replaced, tested, everything works fine. Thanks again to all who responded and to the Forum. I have another quagmire for you but not just yet……. Here is a couple of helpful links that some one gave me that I will pass on to you guys also… thanks…it is nice to cruse again.



http://www.mindspring.com/~houlihan/merc/cruise.htm

http://cathey.dogear.com/SDLcruise.html

http://cathey.dogear.com/cwcruise.html

http://www.mbca.org/pages/tech/MBCA_Troubleshooting_cruise_cont.htm


There are others but these are good ones…