Just buy FI fuel hose (MAKE SURE it says for fuel injection on it so it can handle the pressure!) and cut it to length. This is what I did. You'll then need an extra clamp per injector to hold it on the bottom. I don't care for how the original hose/design is sealed, and I think the kits come with 2 clamps per hose as well. Should be under $5 at an auto parts store for 2' of the hose and a box of clamps! Be careful not to crack the injectors when taking the old hose off.

I replaced every fuel line under my hood. Unfortunaley I had a fire under my hood but, luckily, not due to gas. My tranny coolant line burst open on the highway and caught on fire when I stopped, as tranny fluid had spewed all over my header pipes. Buy yourself 2 new tranny coolant hoses now if yours are the original braided lines. The newer style is rubber with a spring outside to protect the hose from being worn away by the sway bar.