Congratulations on your SL! Once you get the bugs worked out you will be happy with it. It is possible your hard top was not mounted properly, I think I gave you some pointers in the SL forum. If your roll bar light is on, you didn't mention that on other forum, you should be able to reset it, the manual says you push the switch up and hold for 5 seconds. That will reset your rollbar, and if that is reset then if your windows are synced you should be able to remove your top, unless something else is wrong. I find that usually when something on that car isn't working it is operator problem. I have never had any trouble with my top controls except when someone did something wrong or something was out of sync. The computer has to know where everything is in order to proceed, that includes the windows, the rollbar, the gear, the ignition switch, the engine can not be running for hard top removal, lots of things, and any little problem, it will not work. Good luck, let us know how it goes!
B

__________________
Brian W. Heitman

www.MBCA.org/northtexas

Join MBCA!!!