|
Frame (1) on selector lever console
press up and out with plastic wedge.
Ashtray housing
open.
Ashtray insert (2)
remove.
Screw (3) in ashtray housing
loosen with offset screwdriver.
Wood cover (4)
remove upward.
Screws (5 and 6)
screw out (Allen wrench WAF 4 mm , 2.5 Nm ).
Cover (7)
press toward rear and lift at front. Then pry out cover toward front and up.
NOTE: Danger of damage, do not use sharp tools!
Plug connector on switch
disconnect.
Cover (7)
lay down.
Reinstall
in opposite order.
DO NOT OVERTIGHTEN SCREWS 5 AND 6 WHEN REINSTALLING! Mine won't come out because the mating inserts are spinning.
__________________
1995 S600, 1 of 618 (sold)
"Speed is just a question of money...how fast you wanna go?"
LONG LIVE THE W140!
Visit my Web Page at www.v12uberalles.com
|