I followed R Leo's guidance and removed the lower valence below the dash. Using a flashlight and a small mirror, I have examined the entire length of hose. It is soaked, and today I had a small puddle of brake fluid on the inside fender.

Question: is this hose the same diameter and material as other hose in the brake system?

My concerns are twofold: is there similar hose in the brake system that is about to fail; and can I buy this hose in quantity and save some money?

I'll take this opportunity to power bleed all the brake fluid, starting with the clutch and then working (one at a time) from one brake to the next.

I'm learning a lot here. I'll continue posting what I do, and any "first timer" mistakes that I make.

Thanks!

- Patrick

__________________
1982 240D. 198k, Marine Blue/Blue, 4 Speed, Crank Windows, No Sunroof, No Rust, No Oil Leaks
2001 TDI. 197k, Lagoon Blue/Black, 5 speed, Chip, G60/VR6