I actually looked at the actuators and they looked fine, meaning the bolt was in the linkage and that they did not appear to be damaged. I have not pulled a line on the accumulators because I do not feel at this time that they are the problem because the car will go up and down and remain at the height. The problem is the front of the car goes up all the way and down all the way at any given time and no in between which leads me to believe that a sensor it the cause but which one? I don't think the Body acceleration sensors are to blame since this car has 2 in the front and the whole front moves up and down uniformly or level. I will look for that schematic to see if I can make heads or tails of it. Thanks!