Quote:
|
Originally Posted by Brian Carlton
When I take the pads out, I wire brush the machined surfaces of the calipers, where the pads ride, and put a dab of grease along these surfaces. There are four surfaces for each pad. PepBoys sells the grease in a little packet for $1.00. One packet will easily do two wheels.
|
I grease Air Handler and motor bearings a lot. I have always used the same grease with never a problem.
I guess you could use axle grease if you really wanted to.
High temperatures have never been a problem. The only time I have ever had problems is when I haven't greased them.
Danny