I need to get the Clifford manual for the alarm system in my car. I had to replace the battery and now I don't know how to reprogram the alarm. Clifford will send me the instructions when I tell them the model number. They told me that every alarm has different settings so I need to know the exact one in my car. The alarm was installed by the previous owner. I searched for the alarm and could not find it. The remote control for the alarm system is carbon fiber and has 4 buttons on the front and 1 on the side. The alarm system also has a remote starter. I had to reprogram the alarm system once before and the person who did it for me pushed a few buttons on the remote and everything worked in a few minutes. He tried again, but this time was unsuccessful. Now, I pulled the fuse out otherwise the siren will go off.

Here are some pics of what I've done so far:


This is what I believe is called the Valet Switch


Same pic just zoomed out.


I pulled the Light switch out.


Here it is without the switch.


Now I had to remove the nut.


A few twists and it was ready to come out.


Here it is removed.


Next the Emeregency brake has 2 philips screws that need to be removed.


Here they are.


Now once you pull the handle, you can see a 3rd screw.

__________________
1989 300CE Astralsilber/Schwarz
1992 300CE Schwarz/Schwarz