|
I'd have to do a bit of research, but no, I believe this started in 2000 or 2001, not the first few years.
The dealer personnel, at least if you get past the talking heads, should be at least somewhat familiar with the term "virtual calculation" when discussing ML fuel gauges, unless they stayed to long at Carlos O'Kelleys the night before this was covered in training. Or was it Bennigans?
Another area of concern is the body connector for the fuel tank, in the left rear wheel well, it wasn't placed with much thought for what all the raod spray would do to it and can have some connectors corroding in there. If you're LUCKY it's just for the gauge, if not, for the pump!
Gilly
Last edited by Gilly; 05-27-2005 at 12:35 AM.
|