That would be RH thread! Not only tight but peened on! Most of those are also a "slotted" type of nut that requires a special socket!

UNLESS you have done differential set-up work, I wouldn't recommend that you start with that job!

You need to check PRE-LOAD on the pinion assembly before starting & that means a dial style inch-lb torque wrench.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator