Quote:
|
Originally Posted by Moneypit SEL
It wouldn't take much...just enough to fill up the combustion chamber in the head. However, there's no penalty for using more than that, so feel free to feed in a good handfull. Sears sells replacement starter pull cords with handle for 2 or 3 bux. The handle will keep you from dropping the free end in by mistake. Also, you're not likely to spin the engine fast enough to cause any problems, but don't force anything once it feels snug.
|
Thanks for the follow up... I will have to get serious about putting new valve seals in the slow way with a bare bones tool requirement.
I found out I can use a bottom of the barrel valve spring compressor here...
http://www.peachparts.com/shopforum/showthread.php?t=125237
It's a job I've never done and don't want to get too far into until I have it worked out a little in my head. Guess it's time to get the parts list together and put it on the scheduel.