83mercedes, Leathermang, Larry bible, etc,
Thanks for all the responses. I just got in from buying a new battery, and the other ignition parts arrived UPS today. Both of my battery cables were replaced last month, and the grounding nuts and bolts. I'm naturally hoping it isn't the starter/solenoid, as it is a Bosch reman less than one year old, and the last time I R & R'd it last summer, it was a nightmare to do, even with access to a frame lift (which I don't have here). Is there an easier way to R & R the starter on a 300SD other than taking off the exhaust header first?? . Another Forum member happens to live in the town here where I broke down, and has offered not only his tools(if I need anything), but his advice and moral support(probably the most important at this point) as I work thru all this.

I have electrical power to the car accessories with the ignition key at the 2nd spot, but turning it further does nothing.

I'm going outside to check all the connections to the starter and such and see if the new battery makes any difference. Thanks to everyone , so far.

SteveKaa
-----------------------------------------------------------------------
1982 300SD 348k miles