View Single Post
  #2  
Old 07-03-2005, 11:31 PM
bwheitman bwheitman is offline
Registered User
 
Join Date: Sep 2003
Location: Dallas, Tx
Posts: 701
I would get the Front seal replaced as well, It is likely they will replace it anyway since the HP is the inside of the seal. I replaced my seal too when the HB was replaced. The front seal was about $13, it literally pops in, then the HB goes inside the seal over the crank. The belt if it is showing wear replace it too, they have to take it off anyway. Those are some good ideas to make sure they get done while they are in there. Good luck!
Brian
__________________
Brian W. Heitman

www.MBCA.org/northtexas

Join MBCA!!!
Reply With Quote