Quote:
|
Originally Posted by deanyel
It's possible you can get out of the limp home mode, temporarily anyway, by clearing the fault code at the LED button on the 16 pin connector. With the ignition on, hold down the button for 3 seconds, count the number of flashes, then hold down button for 10 seconds, turn ignition off, repeat for other codes.
|
Not quite ..
The button on the 16 pin connector is for CE lamp emmissions related codes only. That led/sw will not get you to the EA/CC modules..
As stated in an earlier post, you have to have a led tool and go to pin 14 .
And the count on that ECU is 2/3 sec retrieve and 8 sec clear..