View Single Post
  #3  
Old 07-07-2005, 02:02 AM
r_p_ryan r_p_ryan is offline
Robert Ryan
 
Join Date: Mar 2005
Location: Bay Area, CA
Posts: 222
I had the identical problem in my 89 300TE. I went through the intake system and fixed all the vacuum leaks. This helped a bunch and I did a write-up in the DIY section as it's not exactly obvious for amateurs like myself. I also recommend checking the condition of the cap and rotor (unlikely though).

I had heard that fuel leak-down is likely to cause this, but since injectors and associated parts are expensive I opted to get a fuel pressure tester and run a series of leak-down tests. Turned out there was zero leakdown, and I saved a bundle on the injectors, fuel pressure regulator, etc. It also reassured me that the fuel pressures were to spec.

And while the problem isn't 100% resolved, I'd say fixing the vacuum leaks improved it by about 75%
__________________
89 300te 222,222
92 300e 190,000
Reply With Quote