Quote:
|
Originally Posted by boneheaddoctor
You were supposed to feed the Diesel purge into the lift pump.....and the return hose into this also....I hope you didn't cut the line between the lift pump and the canister filter like I thought you said.
|
I did my homework and followed this procedure
http://www.mindspring.com/~houlihan/merc/purge.htm
The problem was, like I said, my car was not equipped with the plastic inline filter. But now it is. In other words, I had to create "Point B" in his photo to give me a supply line. I also plugged the line that normally goes into the filter, as instructed- using a tight fitting drill bit, thus plugging the output of the lift pump. Now it appears my lift pump may be leaking, except I don't know where the damn thing is located- would I find it by crawling under the car and looking up? Roughly where?
Dave M.
1976 300D