Originally Posted by BobKristoff

THANK YOU for your reply!!

I have not tested the switch.

What kind of power should I see there?
What poles do I need to cross with Voltmeter to get a reading.

Cannot give you details of pins, but there must be at least one with 12 volts.

Set is reared back so that I cannot access the rear bolts to remove seat.


Power windows do work. Power door locks do not.

If windows roll up/down then usually you can say the relays are okay.
have not found MB relays to be a problem as a rule.

When I got the car (1 month ago) I replaced all fuses in the fusebox in front of the driver seat in the rear of the engine compartment. Are there any other fuses I need to replace?

The auxillary relay/fuse box is back of the box under the windshield, lid has 4 screws.
There are two fuses in there at the back. These are for the anti theft warning system....ck them anyway. Some of them interact with the door switches.

The relays for the seats are :K6, seat/window adjustment. Protected by fuses #E and F. and A...which I am not sure....front right I think....as I said, unusual to have relay problems.

Just remembered...does the steering colomn adjustment work ? Same power source.....Ck fuses 2 and 9. If this does not work the seat memory control may be bad. This is under the seat. I have changed two of these over the last few years.

What relays need replaced? Can you give me the number on top of them? How do I test them?