Steve...thank god you're here.

I followed your instructions on your post regarding the MAS potentiometer. I'm at the point where I'm trying to test the voltage on pin 2.

This is what I just tried a few minutes ago...I put the connector half way to expose the pin, then tried to test it (red prong to pin #2 and black prong to the strut bolt for ground). Problem is, when I put the multimeter on, the idle will suddenly rise. What am I doing wrong?

Am I supposed to put the connector all the way on then try to test pin #2 (ie. put a needle through the wire and place the red prong on that?)

Car runs but the idle is really low around 400rpm.

__________________
JR
1986 Gold 300E 4Dr automatic