Quote:
|
Originally Posted by Saint
Exactly my point. I figure that resoldering the board is the logical first step. It is cheap to do, especially if you do it yourself, and this has fixed the problem many times.
I have a rough idea about how to solder...but I think I may be running into a problem with the protectant on the board. Maybe that is what is causing my resolder failure.
There was guy here or at the mbworld who offered to resolder for $10 I think. I cant find his post anywhere.
|
I do hope you are using rosin core solder and not acid core solder. But you do understand a good point..knowing how to solder...you can overheat components or tracks and ruin them lingering too long or using too high a wattage iron..
I don't know who that was that did it for $10......shipping would be twice that....
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Last edited by boneheaddoctor; 07-20-2005 at 04:19 PM.
|