Have six questions:

1. Anyone know the External Torx socket size for the bolts?

I could buy a kit that includes E6, E7, E8, E10, E12, E14, and E16 from Sears and hope one of them fits.

2. Anyone know the size of the axle nut?

3. Will I need a threaded type bearing puller, or can the old bearing be punched out with a drift?

4. Inserting a bearing by pushing on the outer race with a driver seems logical, does the axle slid easily into the center of the bearing? If not, will I need a special tool to pull/push the axle through the center race without damaging the bearing with excessive force on the inner race?

5. For those who write "buy a bearing tool", what type of bearing tool are you referring too?

6. Anyone here done this job before? If so, your tips or comments are highly appreciated.

Thanks,
MarkC