Don't forget to make a diagram of your belt routing before removal.

Hope this helps....... Russell


Poly V-belt removed. See: Drive Belt\Service and Repair
Overview


End cover (6) take off, fit on.
2nd version: unscrew bolt (5), screw on Tighten to: 25 Nm.
3rd version: unscrew nut (5a), screw on. Tighten to: 25 Nm.
Remove tensioning pulley (3), install.
Unscrew bolts (11) and (12), screw on Tighten to: 21 Nm.
Remove tensioning device (1) with sleeve (2), install.

Attached Thumbnails

 

__________________
Russell McMahon
Tulsa, OK
2001 CLK 320
1992 400se
1993 400e
2000 320ML