Preparation


Open hood. raise to vertical position.
Overview


Model 124: remove fan shroud, install.
Models 129 and 140: take off fan shroud ring, place over fan, fit on.
2nd version: swivel hexagon head (3) an tensioning arm (2) counter-clockwise with wrench (WAF 17).
3rd version: swivel Torx (E10) in tensioning pulley counter-clockwise.
All models: take off poly V-belt (11).
Examine belt pulley surfaces for signs of damage and dirt, replace if necessary (e. g. worn bearing points of tensioning device, dents in belt pulleys etc.).
Install Poly V-belt (11), refer to Poly Drive Belt Routing. See: Diagrams
CAUTION: Do not use belt wax or similar products.

Attached Thumbnails

 

__________________
Russell McMahon
Tulsa, OK
2001 CLK 320
1992 400se
1993 400e
2000 320ML