hope this help... I have a 93 400e (w124 with m119)




Drain coolant from radiator. See: Service and Repair
Unbolt oil lines (7) and (8) of automatic transmission at radiator (4), bolt on. Tighten to: 20 Nm .
Remove oil line (9) of automatic transmission, install.
Remove bracket (9a) of oil line of automatic transmission, install.
Detach coolant hoses (10), (11) and (12), attach.
Remove flat springs (15), install.
Unscrew bolts (16), screw on.
Separate and remove fan shroud (5) and (5a), install.
CAUTION: The air flaps (17) of the fan shroud (5) and (5a) must face toward the inside of the engine compartment.



Remove flat springs (18), install.
Remove radiator (4) up and out of the rubber pads (19) of the cross member, install.
Installation Note: The securing studs of the radiator must be inserted into the rubber pads (19) of the cross member or mounting bracket.



Fill cooling system, bleed.
Check oil level of automatic transmission, adjust to correct level.
Check for leaks.

Attached Thumbnails

 

__________________
Russell McMahon
Tulsa, OK
2001 CLK 320
1992 400se
1993 400e
2000 320ML