Well i just bought a used transmission, 722.311 with warranty. Well when i was getting it off the car my brother dropped the back end, about 10-12 inchess off the ground. Now when i turn the torque converter it dosent move the back end of the shaft. If i take the TQ off it does...its because of the weight that weight it down or something. In other words the front seems to be spinning freely when the TQ is on and the shaft (the rear part of the tranny) is not moving. If i hold the shaft in the back hard and turn the TQ nothing happens when i put in P the shaft end part dosent move but the TQ does...did i just screw up the tranny ? i degreased it for 4 hours ! worked so hard blah