Quote:
|
Originally Posted by stevebfl
The switch on the floor is the standard kickdown switch previously known as "passing gear". As usual, the failure in your system precludes this switch working.
To repair, I would suggest getting the wiring diagram and follow the circuits. The problem will be in the relay or the solenoid, most likely.
------------------
Steve Brotherton
Owner 24 bay BSC
Bosch Master, ASE master L1
26 years MB technician
|
this just problem happened to my 1980 300sd i suspect. really slow to get up to speed. all the vacuum lines up top seem to be clear and in good shape. definatly no first gear unless i use the shifter.
can anyone help me locate the solenoid? i have found the relay as described and that seems to be working but i want to test the solenoid and am unsure where it is.
thanks.