Quote:
|
Originally Posted by 1985 300SD Sady
yes, I just did this 2 days ago on my 300sd and you have to remove the plastic clip on the trasmission hump (back seat foot area) there is a 10mm bolt under that that needs to be removed.
|
Got that. Been struggling for hour or so now with the rest. I got so much stuff taken apart yet the seat wont seperate from the frame that attaches to the floor, nor can I get the wiring harness disconnected.
Did you only pull the black seat mounts off of the floor and not take the seat itself off of these mounts? If so do you have access to all of the insides of the bottom seat this way?
Quote:
|
Also, the wiring harness is much easier to remove when the front of the seat is in the up position, and the seat is as far back as possible.
|
Up position? you mean most verticle position or? How do they unplug? I cant see how they do at the moment. Maybe after moving the seat upright it will make since.
As to my search earlier. I found no threads on the removal of these seats.
Can I install the seats from my 300D into my SD? They are fine