|
I know my motor mounts need replacing too, but the thing is I often see my idle as low as 600RPM. I was wondering if adjusting the rack screw could increase that at that time (when really warm, after a run--hence the shaking).
I don't know how to adjust the screw, it seems like the middle part is loose when the lock is turned out.
Adjusting the rearmost screw CCW (outwards) didn't raise the RPM. The reason I ask is because when you unscrew this, the middle portion is loose and you can easily turn it by hand once you loosen it. Do you turn this CCW as well and then lock it? Like I said I don't know how to do it.
Throttle linkage adjustments have also somehow fine tuned the idle a bit, but not much. ALDA is tweaked 1 full turn CCW and that helped the idling.
Does not stall at stand but you can feel the shaking.
|