Tom,
I am not familiar with the ODB I cars as much as the ODB II, but the ASR light being on complies with the fact that the EA/CC/ISC (N4/1) module is fed information from the ABS/ASR Module (N4/3). This would tell me to check the source of information to the N30/1 module. Also being a 95 model have you checked the wiring in your TBA? The wiring inside the black plastic sleeve disentegrates just like all the othe wiring as well, if it is sending a bad signal for the throttle position through the Enginne control module (N3/4) that could be causing your problem. I would inspect the wires connected to the TBA, if those were ok, then I would fully inspect the ABS speed sensors, and the ASR sensors, the ABS sensors on the wheels are common failure. I don't have a list of what those codes mean, but that is all I can offer, there is a site a guy made, it is really great on the TBA wire replacement, here it is. Good luck!
Brian
http://v12uberalles.com/throttle_actuator_rewire.htm