View Single Post
  #3  
Old 09-13-2005, 01:26 AM
simmo300e's Avatar
simmo300e simmo300e is offline
Registered User
 
Join Date: Jun 2004
Location: Bali, Indonesia
Posts: 200
door check.

you'll need to remove the unit completely to regrease it and that may not work either. there are two large ball bearings which provide a detent at door open and closed, they wear a groove in the casing and can jam at inopportune moments, I had to rush to the supermarket once to assist my wife who couldn't get the drivers door shut.

if this happens, and its your lucky day, a firm shove will release the bearing and close the door. beware, this will work one time only so don't get cocky and think you've fixed it. i did and opened the door again to see if it worked. had to strip off the door panel and remove the door check in the car park. not a good look.
__________________
1987 300e manual 250,000 km (sold)
Reply With Quote