Quote:
|
Originally Posted by ray95e320se
Hi------ You need to remove the internal Hex plug on the outside of the chain tensioner unit, remove the spring, body section & tensioner. Now install the chain with the marks lined up properly. Now re-install the tensioner assembly that will automatically adjust itself. Good Luck ---------- Ray
|
I have tried several times to remove the tensioner unit but it seems to be extremely tight or stuck. I think it may break before it unscrews. Also the time I did force the sprocket onto the cam, the tensioner was in the fully backed off position and the chain was too tight for the engine to turn over by the crank.