The connector, MB part # 203-540-00-53 is about $10.
IN the center of the connector there is a 7mm bolt(wrench size), just un-screw that & pull out on the connector. YOU may lose some fluid if the truck isn't jacked from the front.
OF course you need to disconnect the wiring harness first. JUST rotate the plastic lever on the harness side of the connector & it will "pull" itself from the connector.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|