Help! schematic switch Antenna
 

Here's the problem :mad:

My W124 doesn't come with switch antenna and I've installed it..

The results :
Switch and antenna work well... and i like it very much,
BUT when the radio goes off, the antenna still stays UP :mad:

this is my schematic :

http://i209.photobucket.com/albums/b...IMGP5172-1.jpg

^
^
^
1 & 5 only for the light
2. lead to antenna ( red wire )
3. battery (+)
4. lead to antenna (Trigger / blue wire)

anyone can help me ? :o

here's another pictures which maybe you can help me to figure it out...

http://i209.photobucket.com/albums/b...a/IMGP5169.jpg



Antenna connector,
without switch antenna requires only 3 wires, right?:) (1,3 and 4)

and still 2 wires not connected... (2 and 5)
my question, are these 2 wires necessary to be used in order to make switch working properly?
http://i209.photobucket.com/albums/b...IMGP5170-1.jpg


http://i209.photobucket.com/albums/b...IMGP5173-1.jpg


http://i209.photobucket.com/albums/b...IMGP5175-1.jpg

Thanks folks...!!