|
|
|
|
|
|
#1
|
||||
|
||||
|
Antenna only goes half way down.
Is there a fix or do i need a replacement?
|
|
#2
|
||||
|
||||
|
While it's up, wipe off the excess greasy buildup, then wipe a thin layer of white lithium grease from top to bottom.
__________________
|
|
#3
|
||||
|
||||
|
sometimes the geared retractor looses a tooth, sometimes its just dirt, sometimes you just have to help it down , raise it up clean it like Joe mentioned, help it back down, and that should fix it , if not you may need a new mast
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD ![]() 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
|
#4
|
||||
|
||||
|
Make sure you did not change the switch position for the antenna. Did it go half way up or half way down.
__________________
'86 300E 5 speed '71 Triumph TR6 '46 Cushman Scooter '41 Ford 9N tractor |
|
#5
|
||||
|
||||
|
It might be the switch going bad in general. If you can grab one in the junkyard off of another w126 (even my 82 SDs have the switch) its worth the dollar and peace of mind.
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
|
#6
|
||||
|
||||
|
Cleaned it and greased it and goes all the way up,but only half way down.
|
|
#7
|
||||
|
||||
|
probably have a broken or worn antenna cord. Only way to tell is to remove. loosen mounting bolt, turn on car radio and whole thing should come out. If the cord is broken then you have to remove the unit itself, take it apart to remove the broken piece that is left behind, remount and thread new antenna . Pretty easy R/R except for separating halves of the hirschman
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD ![]() 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
|
#8
|
||||
|
||||
|
OK Thanks
|
|
#9
|
|||
|
|||
|
Most likely one of the plastic wheels stop is broken or the metal roller in the base has a notch worn in it. The unit stops movement when enough load is put on the motor. Heavy binding makes it stop.
Best plan is to call hirschmann audio (number is on here or benzworld I forget) and get a parts repair kit that comes with all of that. Makes it like new. Also comes with a new rubber belt for the motor. |
|
#10
|
||||
|
||||
|
you COULD , do that or just remove and open it up , see what you got, I had the same issue and all it was was a broken mast nylon lead
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD ![]() 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
|
#11
|
|||
|
|||
|
but he says it goes all the way up. Odd if it was broken that it would stop only in 1 direction.
|
|
#12
|
|||
|
|||
|
Does the shaft have a kink in it?
|
|
#13
|
||||
|
||||
|
I took it apart and it was a kink. It was a PITA to get the kink out.
|
![]() |
| Bookmarks |
|
|