I have read in a previous post where you said to take the 2 output wires that originally came off the back of the stock radio, and run those to the front speaker wires and then connect all of those to the new unit's LF and RF outputs - am I getting this correct? This is to run the dash & door speakers I believe...

My question is, the negative wire on the wires that originally came off the outputs of my stock radio pop my REAR speakers when I 9Volt them against the positive leads of the REARS which I tapped into after clipping them off the fader.

Is this correct? Do I still wire it to the negative wire on the front speaker even though it seems to be hitting the the negative terminal on the rear?

Also, where do I splice into the negative wires going to the rear speakers - this is what's really confusing me since I can only find the positve wire at the fader, and don't know where to isolate the negative leads on the rear spaekers.

Am I really confused or way off base - or am I on the proper path????

Thanks alot,

Todd

__________________
Toddro
Franklin, TN
'92 190e 2.6
'91 190e 2.6