PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Injector timing on 300SD (http://www.peachparts.com/shopforum/showthread.php?t=102115)

mplafleur 08-24-2004 02:43 PM

Injector timing on 300SD
 
I was trying out an ADL injection tester I acquired last year on my '85 300SD. At idle, the unit read ~630 rpm and start of injection was ~23.5 degrees.

What are the specs for this engine?

gsxr 08-24-2004 02:49 PM

Using the 'wet' methods I believe spec is 24 BTDC, +/- 1.0. Using the RIV (IP tool) methods it would be 15 ATDC. Sounds like your new toy is neat. It's the kind that clips on to an injector line, right?

:cool:

mplafleur 08-24-2004 05:01 PM

Yes, it has a transducer that clamps around the injector line. The transducer is for a 5.5 mm line, which is on the 300SD and thus will not fit on the 4.5 mm line on the 190D I really needed it for at the time.

gsxr 08-24-2004 05:33 PM

Sweeeeet. How much is the tool, and how much is each different size transducer...?

mplafleur 08-24-2004 09:10 PM

I think I got it off eBay for ~$325 plus shipping. I have no idea how much the transducers are.


All times are GMT -4. The time now is 05:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website