|
|
|
|
|
#1
08-24-2004, 12:31 AM
|
||||
|
||||
|
No Smoke...
Finally did the work that I shouldn't have put off.
New Air Cleaner mount, new rubber mounts and heat shields, good clean connections on all the hoses/tubing.... Results, much quieter car, no smoke while idling, wife much happier. Not sure why the smoke cleared up, but I'm not going to question it! Less than $50 for all new parts and about 45 minutes time to swap them out. '84 SD is purring. Left to do; Purge, valve adjust.
__________________
1998 W202 C230 - The money pit of late. 1984 W126 300SD (356,800 miles) Gone to the wrenchapart  1984 W123 300D Gone to the wrenchapart 1972 W108 280SE 3.5 (sold but not forgotten) 1986 Buick Grand National 3.8l Turbo (86k miles) 1966 Glassic Model 'A' Replica http://www.glassicannex.org  http://banners.wunderground.com/weat...Round_Rock.gif 
|
|
#3
08-24-2004, 01:26 AM
|
|||
|
|||
|
Did you change IP timing?
I have an 87 300DT, a 603, not a 617, but all things being near close in MB diesels, timing is said to have such affect about smoke, or the lack of! I just replaced my head gasket and while I had things apart, I changed my IP timing from 14 ATDC to 15 ATDC and now it smokes well more than it should, a lot more than it did before! 
Last edited by sarafin; 08-24-2004 at 01:31 AM.
|
|
#4
08-25-2004, 04:30 AM
|
||||
|
||||
|
Heh, I'm glad I could make your day Randy....you can thank the missus for releasing the funds to do it.
Sarafin, I haven't figured that out yet. I'm trying to do all the easy things before I get too deep into the engine. All that talk about runaway diesel scared the stuffing out of me ! 
__________________
1998 W202 C230 - The money pit of late. 1984 W126 300SD (356,800 miles) Gone to the wrenchapart 1984 W123 300D Gone to the wrenchapart 1972 W108 280SE 3.5 (sold but not forgotten) 1986 Buick Grand National 3.8l Turbo (86k miles) 1966 Glassic Model 'A' Replica http://www.glassicannex.org http://banners.wunderground.com/weat...Round_Rock.gif
|
|
#5
08-25-2004, 08:21 AM
|
||||
|
||||
|
Quote:
I have wondered in the past when looking at various 300's NA & Turboed why they didn't have the same setup as my 240D. The oil/air seperator on my car is about 4.5" wide and about 7" deep and plumbed back to oil sump. It was a great idea, but they made the lower connection rather poorly. A short tube type connector coming up from sump is over lapped by the pipe coming down from seperator and sealed with an "O" ring.  Needless to say these systems are always "marking their spot" as old Harley's & VW's do. I removed the metal tubing from mine and replaced it with plastic tubing and clamps. Now the only thing leaking is the steering box. "One thing at a time" is my moto these days. 
__________________
'10 Chrysler T&C Stow-N-Go White. Grandpa's ride. '13 Chrysler 200 Touring Candy Red. Grandma's ride. Age and cunning will always over come youth and vigor.
|
|
#6
08-25-2004, 11:02 AM
|
||||
|
||||
|
Quote:
__________________
Never a dull moment at Berry Hill Farm.
|
 |
| Bookmarks |
|
|
Linear Mode
