Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-28-2004, 08:20 AM
Scott98's Avatar
Registered User
 
Join Date: Aug 2003
Location: Weston, FL
Posts: 1,254
Is my injection pump going bad?

Everytime I pull into work now, my car is heated up to about 80 degrees Celcius (not quite all the way) and when I put it into park, the idle surges over about a 200 rpm range. I don't notice it at any other times. It's only when the car is not quite warmed up. I have a new rack pin in the injection pump that I installed a couple years ago. It's not shaking. The pin, though, is adjusted all the way in (I had to put it in that far to stop the shakes). A mechanic that I mentioned that to told me because I had to put it all the way in, that might be a sign that my injection pump is going bad.

Now I am really worried. Is this surging at just below full operating temperature a sign that my injection pump is wearing out?

Thanks,

Scott

__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)
Reply With Quote
  #2  
Old 12-28-2004, 08:21 AM
boneheaddoctor's Avatar
Senior Benz fanatic
 
Join Date: May 2004
Location: Hells half acre (Great Falls, Virginia)
Posts: 16,007
Quote:
Originally Posted by Scott98
Everytime I pull into work now, my car is heated up to about 80 degrees Celcius (not quite all the way) and when I put it into park, the idle surges over about a 200 rpm range. I don't notice it at any other times. It's only when the car is not quite warmed up. I have a new rack pin in the injection pump that I installed a couple years ago. It's not shaking. The pin, though, is adjusted all the way in (I had to put it in that far to stop the shakes). A mechanic that I mentioned that to told me because I had to put it all the way in, that might be a sign that my injection pump is going bad.

Now I am really worried. Is this surging at just below full operating temperature a sign that my injection pump is wearing out?

Thanks,

Scott
back out the rack damper bolt till it stops..........that guy was an idiot. They are not supposed to be all the way in.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Reply With Quote
  #3  
Old 12-28-2004, 08:42 AM
Registered User
 
Join Date: Jul 2004
Posts: 7,381
Your right on with the fuel related diagnosis. Check all the rest of the obvious fuel stuff- filters, return lines, leaks etc...
Reply With Quote
  #4  
Old 12-28-2004, 08:55 AM
Scott98's Avatar
Registered User
 
Join Date: Aug 2003
Location: Weston, FL
Posts: 1,254
Quote:
Originally Posted by MTUpower
Your right on with the fuel related diagnosis. Check all the rest of the obvious fuel stuff- filters, return lines, leaks etc...
I have all new filters and return lines. No obvious leaks in the engine compartment though I haven't done a thorough search of every line.

Scott
__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)
Reply With Quote
  #5  
Old 12-28-2004, 08:56 AM
Scott98's Avatar
Registered User
 
Join Date: Aug 2003
Location: Weston, FL
Posts: 1,254
Quote:
Originally Posted by boneheaddoctor
back out the rack damper bolt till it stops..........that guy was an idiot. They are not supposed to be all the way in.

I'll do that this Friday since I have off. Hopefully that will fix it.

Scott
__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)
Reply With Quote
  #6  
Old 12-28-2004, 09:39 AM
boneheaddoctor's Avatar
Senior Benz fanatic
 
Join Date: May 2004
Location: Hells half acre (Great Falls, Virginia)
Posts: 16,007
Quote:
Originally Posted by Scott98
I'll do that this Friday since I have off. Hopefully that will fix it.

Scott
Let us know.....it should be in no further than nessesary to stabilise the idle....when warm.......if that happeneds to be all the way in then I agree there are other issues.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Reply With Quote
  #7  
Old 12-28-2004, 09:46 AM
Scott98's Avatar
Registered User
 
Join Date: Aug 2003
Location: Weston, FL
Posts: 1,254
Quote:
Originally Posted by boneheaddoctor
Let us know.....it should be in no further than nessesary to stabilise the idle....when warm.......if that happeneds to be all the way in then I agree there are other issues.
I will. The thing that baffles me is that I only get the surging when the car is not quite fully warmed up. If it's warmed up, no problems.

Scott
__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)
Reply With Quote
  #8  
Old 12-28-2004, 09:49 AM
boneheaddoctor's Avatar
Senior Benz fanatic
 
Join Date: May 2004
Location: Hells half acre (Great Falls, Virginia)
Posts: 16,007
Quote:
Originally Posted by Scott98
I will. The thing that baffles me is that I only get the surging when the car is not quite fully warmed up. If it's warmed up, no problems.

Scott
try adjusting it cold then.....just to the point it stops but no further.....see if that helps....

__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page