|
|
|
#1
|
|||
|
|||
Door vacuum question
I have a leak in the unlock line going to the left rear door. The pod holds fine. When I tie in just in front of the driver's seat, the line wont hold any vacuum. Is there a rubber connector between the front seat and the pod? Or is the line itself cracked somewhere, most likely where it flexes at the door hinge?
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#2
|
|||
|
|||
Which one of your many vehicles are we analyzing here? The 123 manual shows a tee between the vacuum switch in the drivers door and the left rear door actuator.
Last edited by tangofox007; 01-08-2005 at 04:07 PM. |
#3
|
|||
|
|||
Sorry, 85 300td. It's actually a 'Y' right in front of the driver's seat with one side heading over to the right side and the other going to the left rear door.
I'm thinking it's probably a solid plastic line all the way to the actuator from that point, but I'm not sure. The line won't hold any vacuum at all, which means it's disconnected from a fitting or has a big cut in it.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
Bookmarks |
|
|