well, I sprung another fuel leak today on the way to work.

A few months ago I had the line to cyl 4 start leaking and no matter what I did, I couldn't get it to stop leaking at the injector where the line attaches to it. I ordered an injector and line, and luckily the line fixed it so I sent the injector back.

Today however, cyl 1 line started leaking, so I just went ahead and ordered the other 5 lines and clips and have taken the car off the road for awhile to do all the other needed stuff such as pull the intake and replace all those seals as well.

The thing is, after I replaced the line to #4, I became aware that when I put my hand on the older lines, I could feel them pulsing with the tick of the engine. The new line to #4, I could feel nothing. What gives?

I guess i'm expecting them all to feel the same way after I replace them.

__________________


1980 500SE/AMG Euro
1981 500SEL Euro
1982 380SEL
1983 300TD
1983 500SEC/AMG Euro
1984 500SEC
1984 300TD Euro
1986 190E 2.3-16
1986 190E 2.3
1987 300D
1997 C36 AMG
2003 C320T 4matic

past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350

The new lines are not stressed with age + it may be a couple of thousandths thicker tube.

__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/

Injection lines seem to crack at the base that attaches the IP. I make sure all lines are secured by their rubber securing mounts so they don't vibrate and later fatigue the metal and crack!

All my lines pulse, some more so, some less so. I wouldn't worry about it!

Yeah I figured these lines have lasted 230,000 miles so it couldnt hurt to throw a new set on there.

__________________


1980 500SE/AMG Euro
1981 500SEL Euro
1982 380SEL
1983 300TD
1983 500SEC/AMG Euro
1984 500SEC
1984 300TD Euro
1986 190E 2.3-16
1986 190E 2.3
1987 300D
1997 C36 AMG
2003 C320T 4matic

past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350

i had that happen on my ol 180D. after i made sure the little brackets that tie one line to the next in several places to keep vibration down were on and tight, it never broke another one.

__________________
Current money-pits:
96 Passat TDI
78 300D 100k miles(60miles/day)FOR SALE
91 Jetta Diesel 250k miles (80miles/day)
82 Toyota Diesel pickup 150k miles; out of service for a little while with a valve problem.
All on BelenBioDiesel
Past diesels:
01 Golf TDI
81 Isuzu P/U
85 Jetta
89 KW 425 cat
85 Pete 400 cat (currently still running the west coast with over 1.5 million miles)
81 KW 400 Cummins
77 Freightliner CO ???? Cummins (Buttercup)
57 180D lots of miles(gone but not forgotten)

I forgot to order new ones today, I'll be sure to get them all tomorrow.

__________________


1980 500SE/AMG Euro
1981 500SEL Euro
1982 380SEL
1983 300TD
1983 500SEC/AMG Euro
1984 500SEC
1984 300TD Euro
1986 190E 2.3-16
1986 190E 2.3
1987 300D
1997 C36 AMG
2003 C320T 4matic

past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350