|
|
|
#1
|
||||
|
||||
Oil in Prechamber
Last night I pulled my injectors and was supprised to find a pretty sizable amount of oil in the prechamber/injector holes, if that makes any sense. I did a search on this topic and this is what I came up with.
http://www.peachparts.com/shopforum/showthread.php?t=87120&highlight=oil+prechamber Is this some kind of serious problem? Can I clean it out with WD-40 sprayed into the prechamber. Thanks for your help.
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
#2
|
||||
|
||||
Bump, and thanks
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
#3
|
||||
|
||||
Bump one last time. I'm putting them back in tonight. Thanks
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
#4
|
|||
|
|||
It is something which can be serious....
So I suggest you keep looking for where it has been talked about... I think it can cause the precombustion chamber to burn out... I was not able to visualize the path that was talked about... but I have seen it in the shop manual also.... |
#5
|
|||
|
|||
Head gasket or drippy injector is usual cause. You can clean all you want but it isn't going to fix the problem. Having the injectors checked is pretty easy: take to injector shop, have them show you that they have the manual for your injectors, then insist on numbers for crack and spray - before and after adjustment - as well as visual check on spray pattern.
__________________
daBenz - 1970 220D |
Bookmarks |
|
|