|
|
|
#1
|
||||
|
||||
Swapping seat question for 123
Are the passenger and driver's seat bottoms interchangeable? The car is a 1985 300 turbodiesel.
|
#2
|
||||
|
||||
Yes....but you gota swap the seat frames and keep the rails on the original sides. It takes me a couple hours maybe longer but I'm slow. A GOOD long philips bit for the screw gun helps and have them side by side on the work bench.
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#3
|
||||
|
||||
Worked for me...
I replaced my worn out driver's seat with a newer passenger's seat, rails and all. I suppose if you wanted to get really fancy, you could swap the rails, and even swap the adjusting knob to the opposite side, but neither are absolutely necessary to get the seat to bolt down on the driver's side.
Nate
__________________
1985 300DT, Classic White, California, 159K 1982 240D, Metallic Silver-Blue, Manual Everything, 376K 1981 240D, Orient Red, Parts Car/Engine Donor, 145K "When nine hundred years old you reach, look as good you will not. Hmm?" - Yoda |
Bookmarks |
|
|