PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   98 E300 throws Wastegate Solenoid code during italian tune up (http://www.peachparts.com/shopforum/showthread.php?t=140747)

superlite17 12-23-2005 07:46 PM

98 E300 throws Wastegate Solenoid code during italian tune up
 
I was doing my best to blow a little soot of my 1998 E300 yesterday and about a minute after I slowed down, the check engine light came on and the car now feels like it has lost a lot of power. The CEL generated 2 codes. P0243 (Turbo/supercharger Wastegate solenoid "A") and P0100 (MAF).
The freezeframe on my code reader indicates 108 mph at time. I was driving uphill in 4th gear with the RPM about 500 shy of redline if I remember correctly. My thinking is I blew out just a little too much soot and should drive it for a week or two and see if it resolves itself. Any feedback and advice is much appreciated. The only Diesel experience I have is 20 years ago with a Fairbanks Morse (emergency power) on a U.S submarine and we had lots of manuals, which sadly I dont have for the 210 Benz.
Thanks and HAVE A MERRY CHRISTMAS,
Paul




1998 E300

nhdoc 12-23-2005 10:22 PM

I got the same code a week or so back on my '98:

http://www.peachparts.com/shopforum/showthread.php?t=140060&highlight=p0243

It has not come back since I reset it and the car's been fine so I haven't looked for the problem but if you are still having a loss of power it could be the wastegate is stuck open and dumping all the turbo boost.


All times are GMT -4. The time now is 01:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website