![]() |
|
|
|
|
#1
|
|||
|
|||
Wagon not level after sitting.
Hello all,
I've read a lot about how to adjust the SLS system in my 1981 300td wagon, but I couldn't find a thread on why the rear sags after a bit with the motor off. It does pump up right away though. Hope there is an easy fix. Any help would greatly be appreciated. Thanks |
#2
|
||||
|
||||
My quick guess would be a leak if it sags way down aftewards quickly. But not neseccarrily. I'm no expert but it is a possibility. Mine seems to stay in the upright position at least for a few days which is the longest I've had it without running it.
__________________
76 300D 130K "Stella" (Sold ![]() 74 240D 299K (Donated to Highschool For Senior Project WVO) 83 300TDT 290K (My one and only) Sanford, NC |
#3
|
||||
|
||||
Your oil pressure is bleeding down. If it pumps right back up when started then thats my guess. I just dont know that much about the wagon suspension.
__________________
1981 300D 147k 1998 VW Jetta Tdi 320k 2001 Dodge Ram 2500 141k 1979 300D 234k (sold) 1984 300D "Astor" 262k(sold) Mercedes How-To and Repair Pictorials I love the smell of diesel smoke in my hair ![]() |
#4
|
|||
|
|||
I'm thinking leaking oil pressure too. I know it is not leaking out of the system. Any rebuild kits out there?
Thanks |
#5
|
||||
|
||||
I haven't looked but I hope there is if that is the problem. These components are EXTREMELY expensive. I would verify that this is your problem (I'm agreeing with the pressure thing as well if you know it is not leaking) then give Phil a ring and see if they make anything. If they do I'm sure he can find it for you.
__________________
76 300D 130K "Stella" (Sold ![]() 74 240D 299K (Donated to Highschool For Senior Project WVO) 83 300TDT 290K (My one and only) Sanford, NC |
#6
|
|||
|
|||
you need to rebuild the height adjustment valve
It's the valve in the rear of the car that controls the hieght of the car. Assuming nothing else is leaking...
It's a one day project and you can get a rebuild kit from Phil, it a messy job but not techically difficult and takes about a day. http://www.peachparts.com/shopforum/showthread.php?t=54894&highlight=rebuilding+wagon I have seen another post on rebuilding it that I used, but I can't seem to find it. Mine did the samething until I fixed... |
#7
|
|||
|
|||
Thanks to all!
I'm going to hopefully tackle this and also the K1 spring kit over spring break. I'll try to post some pictures.
Thanks! |
![]() |
Bookmarks |
|
|